 | Model FC Flexible Coupling Clutches |
|
|
 The Flaton Model FC is an adjustable clutch with a built in flexible shaft coupling assembly. It is used in applications which require flexibility, in addition to torque control, for protection against overload.
Download the Model FC Brochure
| |
|
|
Coupling Shaft Lengths When considering shaft extensions both shafts must be greater than the minimum and less than the maximum on both the "A" and "B" sides. 
|
| Model Number | A Bore Side | Gap |
B Bore Side | | O Min. | P Max. | U |
R Min. | T Max. | | 10-FC | 1 1/8 | 1 3/16 | 1/8 |
1 7/16 | 1 9/16 | | 15-FC | 1 1/2 | 1 9/16 | 1/8 |
1 15/16 | 2 | | 20-FC |
1 3/4 | 1 7/8 | 1/8 |
2 1/2 | 2 5/8 | | 25-FC | 2 | 2 1/8 | 3/16 |
2 11/16 | 3 13/16 | | 30-FC | 2 1/2 | 2 11/16 | 3/16 |
3 5/8 | 3 13/16 | | 35-FC | 3 | 3 3/16 | 1/4 |
4 1/4 | 4 7/16 | | 40-FC | 4 | 4 3/16 | 5/16 |
5 3/8 | 5 9/16 | | 45-FC | 5 | 5 1/4 | 5/16 |
7 | 7 5/16 | | | |
Parts List | 1 Housing
2 Thrust Head
3 Adjustment nut
4 Driven sprocket
5 Friction cone
6 & 7 Thrust bearing assembly
8 Pressure ring
9 Chain and link
10 Cover (Cover is an optional purchase part.)
12 Driven sprocket cover seal
13 Conepoint setscrew
14 Capscrews-4 (For size 40 and 45 only.)
15 Pipe plug
16 Setscrews-4
|
When requesting parts or additional information, please reference the clutch size. For the thrust head, #2, reference "B" bore and keyway size. For the driven sprocket, #4, reference "A" bore and keyway size.
| |
The descriptions and specifications contained in this manual were in effect at the time of printing. Bushman Equipment, Inc. reserves the right to change specifications and designs at any time without notice and without incurring any obligations.
©2006 Flaton Clutch Division of Bushman Equipment, Inc.
|
PO Box 309, Butler, WI 53007-0309
262-790-4200 * 800-338-7810 * Fax 262-790-4202 www.flatonclutch.com
custinfo@bushman.com
www.bushman.com www.westbendequipment.com | | |
| |
